CAREL powersplit
CAREL powersplit
CAREL powersplit series
powersplit is a series of controllers for multiplexed cabinets with on-board compressors. Thanks to the continuous monitoring of a series of features, such as: critical events (HACCP), the local network, the connection of the supervisory and telemaintenance systems, the power relay outputs, the terminal block on the board and the optical light sensor, the powersplit controller represents the top of the range.
powersplit is not just a controller, but rather a range of products, available in configurations with 4 or 6 outputs, and with or without built-in clock.
powersplit is designed to reduce the wiring and power components, and consequently reduce the number of product codes handled and inevitably costs. All with the maximum reliability of mass-produced device. The power board has been designed to eliminate the need for the auxiliary terminal block.
powersplit small
powersplit is available in a more compact version with 4 relays. In this new model, the RS485 serial and clock boards have been integrated directly into the printed circuit and consequently are included as standard. New software functions have also been added that make this product ideal for applications such as supermarket showcases.
Technical Specifications
| Power supply | 230 Vac (±10%), 50/60 Hz or 115 Vac (PSB*11100) |
|---|---|
| Control range | -50T90 ºC, resolution 0.1 ºC |
| Inputs | 3 for NTC probes; 2 digital for non-optically isolated voltage-free contacts |
| Outputs | 1 x 250 Vac NO relay, 10 (10) A (2 HP compressor); 1 x SPDT 250 Vac relay, 14 (2) A (defrost); 2 x 4 (2) A relays, (fan and alarm); 1 x 250 Vac relay, 10 (10) A (aux 1 and light); 1 x 4 (2) A relay (aux 2) |
| Outputs on powersplit small | 1 x SPDT relay, 6 (4) A (compressor); 1 x 250 Vac SPDT relay, 12 (2) A and 14 (2) A (defrost); 1 x 250 Vac NO relay 10 (10) A (light); 1 SPDT relay, 2 (2) A or 6 (4), with changeover contacts (alarm/aux) |
| Connections | max. continuous current with all relays activated, 25 A total |
| Serial connections | two-wire LAN, AWG22-24 max. 10 m; powersplit small: three-wire LAN, max 10 m.; three-wire RS485, max. 500 m |
| Clock (when fitted) | RTC, management of dd: hh: mm: ss: weekday (0-7), date maintenance with 7 mA/h rechargeable lithium battery, complete recharge in around 20 hours (equivalent to around 6 months at full charge) |
| Installation | wall mounting using plastic or metallic spacers |
User terminals
Small display
This terminal has the same appearance and drilling template (32x74 mm) as all the controllers in the plug-in series. The innovations introduced with this new-concept controller have been focused on maintaining the same "feel" for those who use the instruments in the plug-in range. This is important in both aesthetic and functional terms, as new users of this controller require very little time to be able to fully exploit all the functions.
Large display
As well as being aesthetically pleasing, this display features numerous functions. The display has 4 digits, the keypad has silicon buttons and is thus more ergonomic and reliable than the classic polycarbonate version. The buttons are backlit and easy to use, providing direct access to the functions: HACCP, light, defrost and continuous cycle. This display can also be easily and economically customised, thanks to the removable frame. One very important featere is its size: just 22 mm. deep.
Display terminal (PST*VR*)
This can always be connected in parallel to the user terminal for the setting parameters.
It can be used to display the temperature from the third probe, located in the hot point of the cabinet as envisioned by the standard EN 441-13.
Contact us today for a quotation or for further information
Heading 2 - Product(s) or Service(s)
This paragraph will contain more information which contains the paragraph heading key phrase near the beginning if you can, if not it's not critical. It always helps if you can work in another page or site key phrase along the way. Please ensure you give full information as search engines prefer content rich websites. So the more relevant information your site has the better the results are likely to be. You shouldn't include duplicate content on your pages either, as search engines will disregard this. Use the analyser in the bottom left to see how your page is doing in reference to Search Engine Optimisation.
Heading 3 - Benefit's to the Reader
This paragraph will contain more information which contains the paragraph heading key phrase near the beginning if you can, if not it's not critical. It always helps if you can work in another page or site key phrase along the way. Please ensure you give full information as search engines prefer content rich websites. So the more relevant information your site has the better the results are likely to be. You shouldn't include duplicate content on your pages either, as search engines will disregard this. Use the analyser in the bottom left to see how your page is doing in reference to Search Engine Optimisation.
Heading 4 - Contact Details
This paragraph will contain more information which contains the paragraph heading key phrase near the beginning if you can, if not it's not critical. It always helps if you can work in another page or site key phrase along the way. Please ensure you give full information as search engines prefer content rich websites. So the more relevant information your site has the better the results are likely to be. You shouldn't include duplicate content on your pages either, as search engines will disregard this. Use the analyser in the bottom left to see how your page is doing in reference to Search Engine Optimisation.